Y type Remote Control Float Valve DN65
|Terms of Trade:||FOB,CIF|
|Delivery Time:||15 Days|
|Productivity:||100Kpcs per month|
|Place of Origin:||Taiwan|
|Supply Ability:||Depend on The Quantity|
|Certificate:||API Ce ISO Ts|
Model No.: FLV08
FLV08 Pressure Reducing Valve is a diaphragm type of hydraulic control valve driven by the hydraulic pressure within the piping system. The function of the valve is to reduce the high pressure to the pre-set low pressure, and despite the ﬂuctuation of medium ﬂow or pressure before the valve the pressure after the valve will always remain stable and maintain the set pressure range.
FLV08 Pressure Reducing Valve is controlled by pressure reducing pilot valve and equipped with pressure reducing pilot valve, needle valve, mini strainer and ball valve, etc.
of the basic valve through the needle valve (1); When the pressure before the pilot valve (3) is lower than its pre-set value, the pilot valve will remain at full open position and the upper cavity room of the basic valve is not able to get accumulating pressure. Under this condition, the disc of the basic valve will be open at the water pressure from the inlet opening to allow water ﬂow. The pressure reducing pilot valve closes gradually when the pressure after pilot valve exceeds its pre-set value. Pressure gets accumulated within the upper cavity room and membrane drives the disc down to close the valve till the pressure after the pilot valve gradually reduces to its pre-set value. The pilot valve opens again when the pressure after the valve becomes lower than the pre-set value, and the basic valve will then open with the release of the accumulated pressure in the upper cavity room.
The throttle oriﬁce (5) that connects the lower cavity to the outlet serves to keep the reaction of the valve gentle and stable. The ball valve (4) controls the outlet water ﬂow rate from the upper cavity room and thus to stabilize the action of the basic valve. The ball valve can be adjusted with different working conditions. In case of emergency, the ball valve can also be closed manually for cutting off of the basic valve.
◔ Property and advantages
• Driven by pressure of pipe system, work automatically with energy of pipe system to achieve energy conservation and environment protection.
• Controlled by the pilot valve, lower energy consumption, achieve accurate pressure reducing results, have function of stabilizing pressure after the valve.
• Dual cavity design, with functions of fully opening and fully closing. Slow shut causes no pressure ﬂuctuation, and the diaphragm with support is well protected.
• Have internal oriﬁce, connect bottom cavity and outlet of the basic valve, make sure stability of reaction to keep stability of pressure after the valve, avoid any vibration and noise.
• Channel with straight-ﬂow, slight friction loss, no eddy ﬂow and turbulent ﬂow, cut down the damage of cavitation.
• Long pitch orientation design for stem move, stable and no gap resistance.
• Balanced automatically, big gap design on connection of disc and stem, disc is free on the vertical ﬂat against stem, it can balance the tolerance from machining and sealing surface. Good connection without leakage. Achieve functions of both reducing dynamic pressure and reducing static pressure.
• Ductile iron castings with nodularity higher than 90%, foundry in house with advanced melting technology and strict quality control system, testing reports and testing bars can be supplied with order. Records and testing bars maintained for one year in the factory.
• Good corrosion resistance, with stainless steel, copper alloy, rubber made from DuPont and other rust- resisting material, fusion bonded epoxy coating both for interior and exterior surface of the basic valve. All the characteristics in accordance with ANSI/AWWA C550 and other international speciﬁcations like WRAS, NSF61.
Under normal conditions, water ﬂow comes continuously from the inlet opening to the upper cavity room.
A1BEST International Corporation
A1-BEST is one of the professional Valve manufacturers in China and Taiwan for over 20 years, a worldwide valve solution manufacture with full range and specifications of various valves: Ball Valve, Gate Valve, Globe Valve, Check Valve (NRV)Butterfly Valve, Forged Steel Valve etc.
A1-BEST has been struggling for carry out most cost-efficient, easy performance and long last life products for global market.
At present, A1-BEST occupies 100,000 m2 with 15 workshops cover 3000~4000m2 of each. It locates in High-Tech Industrial zone of Kunshan Jiangsu Province. Products meets industry standards as per ANSI 16.10 / ANSI 16.11/IS/BS/DIN/JIS.Material of construction is selected based on Pressure / Temperature limits and corrosion resistance or customers` requirements. This will be as ASME/ANSI 16.34 standard .testing is carried out as per API/BS/DIN standard.
- Company Name: A1BEST International Corporation
- Representative: CHANG YUAN CHIEH
- Product/Service: VALVES , BUTTERFLY VALVE , GLOBE VALVE , FLAT VALVE , STATION VALVE , HYDRAULIC CONTROL VALVE
- Capital (Million US $): US $ 25,000,000
- Year Established: 2017
- Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$50 Million - US$100 Million
- No. of Production Lines: Above 20
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 31 -40 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Suzhou, Jiangsu Province, China
- Contact Person: Mr. Jason Chang
- Tel: +886-912-195558
Premium Related Products